The heron may be the scourge of all koi keepers, pond and lake owners if they are unlucky enough to receive a visit from one but they actually are impressive birds with quite a distinct prehistoric look. This weathervane is a very impressive homage to the heron and is a high detailed copper weathervane design. It can be used to great effect to compliment ponds, lakes and much more. The heron weathervane can add decoration and a point of interest to the garden or the roof of an exterior structure to create a lovely functional feature

The heron weathervane could also be the perfect accent piece for a building or structure that features the name “Heron” in its name or is located close to a pond, stream, river, marshes, lake or sea

Weathervane Rod

The weathervane rod that fits into the bracket is 10.5mm diameter steel tubing that is treated with a durable exterior black powdercoat paint

Standard Bracket

Each weathervane is supplied with a standard 125mm (5 inch) eaves bracket. Other brackets and fixings are available (see Brackets & Fixings tab for more details)

Features

• Easy to assemble and install (including step by step instructions)

• Includes everything you need to construct the weathervane: Steel rod, NSEW directionals, copper globes and weathervane figure

• Exclusive Single Point Contact design allows the weathervane to spin freely in the wind

Construction

• Copper: The weathervane designs are handcrafted from pure copper and brazed. Brazing may be visible on some designs but doesn't tend to lessen the beauty of the lovely copper weathervane design. Globes and spacers are also made from pure copper, copper over time naturally ages to a Verdigris patina. To delay the onset of the natural patina and extend the look of the polished copper finish a clearcoat enamel can be applied. The copper needs to be cleaned with soapy water, wiped with a micro cloth and left to dry before coating with enamel

• Brass: Cast brass is used for the NSEW cardinal points on the range of copper weathervanes

• Steel: Rods and brackets to mount the copper weathervanes are made from steel. The steel is treated with a durable exterior black powdercoat paint. The finish should be good for a reasonable amount of time out in the elements but in time if the steel rods and brackets weather they can be painted with an exterior metal paint such as Hammerite which restores the finish and will help preserve and extend the life of the fittings. Clear mastic can also be used on any joints for example where the rod is inserted and secured into the bracket to seal and further weatherproof and prolong the life of the steel bracket and rod